VK SK 03 Bat box

Maternity Facility3 Compartments Conform BIJ12
Item number:914630120
Material:FSC® wood, Plywood (FSC®), Spray Cork
This very large maternity bat box is suitable for installation against masonry facades as well as on sheet piling. Since sheet piles are typically too slippery for bats to land on, this box features an extended back wall. Bats can land on this section and crawl into the box from there.

Enter the quantity and click

Ok

This extra wide maternity bat box is suitable for installation against any type of facade so also against sheet piling facades. The box is equipped with an extra-long approach board so the bats can land on it. From there, the bats can crawl into the box. The box’s open bottom makes it easy to check. The three compartments, spaced 19 mm apart, are mutually accessible through holes in the partitions. The compartments create different microclimates in the box. This maternity bat box can also be used freestanding on posts. For options, see the VK SK 08. There are several bat species that can use this bat box. This depends on the species that occur locally. This box is suitable as a maternity box but can also serve as a summer and/or breeding box. In mild winters, the box can also serve as a shelter. As a maternity/summer or breeding box possible for:

  • Whiskered Bat
  • Common Pipistrelle
  • Soprano Pipistrelle
  • Serotine (experimental).
  • Pond Bat (experimental).
  • Nathusius’ Pipistrelle
  • Particoloured Bat (possibly also as maternity box)

In mild winters, possible use by:

  • Common Pipistrelle

The Box is made of waterproof bonded exterior Plywood. On the inside of the back wall and on one side of the partition, it is finished with spray cork for good grip. For better box protection and insulation, the outside of the box is also finished with spray cork. The Box comes with the appropriate hanging hardware for easy mounting.

  • Place the bat box in a suitable location on the facade or on posts, as shown in VK SK 08. Use the plugs and screws provided.
  • Install the box at a minimum height of 3 meters.
  • The box is less suitable for installation in trees, but it can be done.
  • The box can be placed facing any wind direction.
  • Provide a clear approach and egress route for the box.
  • Do not place boxes above windows and doors.
  • Do not install the box on illuminated facades or in light from lampposts, etc.
  • It is preferred to have multiple boxes placed near each other. When doing so, vary the wind direction and altitude.

Bat boxes can be cleaned once a year in winter, preferably during a frost period. Be sure to check that the boxes are not occupied first! A special long-handled brush can be used to remove cobwebs and other debris from the box.

  • Item number: 914630120
  • Weight (kg):18
  • Material:FSC® wood, Plywood (FSC®), Spray Cork
  • Species group:Bats
  • Species:Common Brown Long-eared Bat, Common Pipistrelle, Nathusius' Pipistrelle, Serotine, Soprano Pipistrelle, Whiskered Bat

LOOKING FOR EXPERT ADVICE?

Please contact us. Our experienced consultants are here to help you

Copyright Vivarapro
Sitemap

Highlight

IP BL 02 Insectenblok

IP BL 02 Insect box

View product
NK GZ 10 Gierzwaluw gevelnestkast

NK GZ 10 Swift facade nesting box

View product

Highlight

Gevelkast voor Vleermuizen gemaakt van Houtbeton in een Europese fabriek

VK WS 12 Bat facade box

View product
built in box for house sparrow made from Woodstone

IB MU 08 House sparrow built-in nest box

View product